The Stage 2 Cut N’ Turned Beam Kit is a high performance mid-travel suspension upgrade for the front and the rear of your Bronco or F-150.

The front suspension is similar to the Stage 1 Kit, providing 12 inches of usable wheel travel in 4×4.

In addition, the Stage 2 kit increases the rear suspension travel to a whooping 14 inches. This converts your Ford Bronco or F-150 into a great prerunner for the desert and awesome all around off-road vehicle.

A set of heavy-duty extended stainless brake lines for the front and the rear are included as well.

 

Front

The Dana 44 TTB Beams are modified to allow for proper camber alignment with the 4″ coils. The 1.25” Extended Radius Arms are equipped with heim joints and bring the vehicle’s camber to the correct value.

Included is a set of Bilstein 5100 or 2.0 Fox Remote Reservoir shocks, specifically valved and configured for a Bronco or F-150. A secondary shock option is also available – see options.

 

Rear

The Deaver Q80 leaf springs are paired with our Q80 Shackle Conversion Kit to produce 14 inches of travel!

The rear Bilstein 5100 or Fox 2.0 Remote Reservoir shocks can remain in the stock location mount. Ford F-150 trucks require a special setup in the rear, please contact us for options.

 

Bronco w/Solo Stage 2 Kit installed 

Solo Stage 2 Mid-Travel Kit Front+Rear

$4,149.00Price
    • Front suspension travel approx.: 12 in
    • Rear suspension travel approx.: 14 in
    • Front and rear suspension lift approx.: 4 in
    • Recommended tire size: 35 in
    • Fiberglass required: No
    • Driveshaft modification required: No